Safe, compliant shore power installations for craft in The Hamble — marina hookup, chargers and galvanic isolators. Covering Hamble Point Marina, Mercury Yacht Harbour, Port Hamble Marina and surrounding berths.
If you're keeping a boat in The Hamble, you'll know that the Hamble is synonymous with sailing excellence, and its marinas — Hamble Point, Mercury Yacht Harbour, and Port Hamble — attract vessel owners who demand the best. We deliver qualified yacht electrical work to match the benchmarks expected on the Hamble. It's a backdrop we plan near on each The Hamble visit.
On craft kept in Hampshire, reliable shore power is essential for marina-based craft. We fit and repair shore power systems to the highest safety benchmarks, including galvanic isolation and RCD protection. The Hamble Point Marina fleet sees plenty of this kind of task — and it's what we set out to be good at. It's the same standard whether the work is for a weekender or a serious bluewater vessel in The Hamble.
Shore power problems can be dangerous — we test polarity, earth bonding and galvanic isolation properly, not just whether the lights come on.
Wind-over-tide can make some moorings tricky to step onto — knowing the conditions saves wasted visits.
We fit ELCBs, isolation transformers and properly labelled AC distribution to current marine AC benchmarks.
The local fleet leans towards serious cruising yachts, often with significant electrical complexity behind the panel.
Yacht work is unforgiving — we plan callouts carefully and task to a clear method on each visit.
For boat skippers in and around Hamble Point Marina and Mercury Yacht Harbour, plenty of our projects come from yard recommendations and word-of-mouth from local boat skippers. All cable runs are properly secured, labelled, and protected from chafe — the way marine wiring should be. Long-standing relationships with local yards mean we can usually arrange access, lift-outs and yard task as part of larger projects.
Near Hamble Point Marina, new shore power inlet, isolation transformer or galvanic isolator, RCD protection, and proper earthing — everything needed for safe marina power connection in The Hamble. Crossover switching between shore and inverter sources needs proper interlock — we plan and fit with safety the priority. It's how we work on every visit to Hamble Point Marina and the wider The Hamble area. All over Hampshire, this kind of job makes up a real share of what we do.
On craft moored at Hamble Point Marina, we frequently see issues caused by long-term shore power — we check for it on every visit. Local insurers in Hampshire expect documented job — we provide the paperwork as level. In Hampshire, older boats commonly need shore-power setups brought up to current standards — we handle the certification too.
For boats kept in The Hamble, victron IP22 and Blue Smart chargers — properly sized for your battery bank and configured for your battery chemistry. Automatic multi-stage charging. Shore power problems can be dangerous — we test polarity, earth bonding and galvanic isolation properly, not just whether the lights come on. On craft in and around Hamble Point Marina, this is a routine part of what we deliver.
Skippers in The Hamble typically value reliability over flash — that aligns with how we approach every job. Yachts kept at Hamble Point Marina face the usual coastal challenges — UV, salt and the occasional knock — we build for it. Vessels in Hampshire frequently see year-round use, so durability matters more than show — we build for that.
When we attend craft in The Hamble, essential protection against galvanic corrosion when connected to shore power. We install and test galvanic isolators on yachts in The Hamble. Galvanic corrosion from poor shore power earthing eats expensive metalwork — getting the AC setup right protects your vessel as well as your crew. That level applies whether the yacht is at Hamble Point Marina or on a private mooring nearby. It's level practice for the task we carry out across The Hamble.
Working in The Hamble means knowing the local marina contacts — useful for arranging access, lift-outs and contractor coordination. Plenty of yachts berthed at Hamble Point Marina are kept on the water year-round, so winter resilience is part of the brief. The mix of berths around The Hamble means we bring kit for both pontoon and swinging-mooring access.
On Hampshire-based boats in and around Hamble Point Marina, shore power not working? RCD tripping? We diagnose and fix shore power faults, check polarity, test earth integrity, and make sure safe operation. We install ELCBs, isolation transformers and properly labelled AC distribution to current boat AC standards. That detail matters more than it sounds, particularly for vessels kept around Hamble Point Marina.
Vessels based in The Hamble are frequently used by multiple family members or charter crews — clearly labelled controls matter. On older boats in and around The Hamble, panel real estate is tight — we plan layouts to fit cleanly without compromising serviceability. Plenty of The Hamble craft are used for cross-Channel passages — systems need to be reliable, not just functional.
Yes — we install and certify shore power setups on craft in The Hamble, with proper polarity testing, earth bonding and RCD/ELCB protection to current standards. Send a couple of photos of the existing installation and we'll come back with options and pricing.
Certainly — Most boats in The Hamble have a few quirks behind the panel — part of our job is understanding those before recommending what to do next. All job is signed off with a written test certificate suitable for insurance and survey purposes. We've completed projects like this plenty of times for The Hamble-based owners. Drop us a line with the vessel make, model, and current setup and we'll come back with a clear answer.
Pricing is straightforward: free assessment in The Hamble, written itemised quote, then job proceeds only with your sign-off. Nothing is added without your agreement. Drop us a line with the craft make, model, and current setup and we'll come back with a clear answer.
AC shore power work in The Hamble covers everything from a new shore inlet to full AC distribution rewiring with isolation transformer and galvanic isolator. Give us a ring or send a message and we'll arrange a free on-board look in The Hamble.
Shore power work in The Hamble is part of our daily work — sockets, RCDs, polarity testing, isolation transformers and galvanic isolators all handled. Get in touch with the basics — craft type, marina, what you're trying to achieve — and we'll take it from there.
65 minutes from our Lancing base. Free assessment, then a written quote.
We're happy to talk through a job before quoting — drop a message with the boat make, model and berth in The Hamble, and we'll come back with the right next step.