Victron Cerbo GX fit-out and configuration in The Hamble — full system monitoring with VRM remote access. Booking ahead in The Hamble or emergency response when you need it.
The Hamble sits within Hampshire, and the Hamble is synonymous with sailing excellence, and its marinas — Hamble Point, Mercury Yacht Harbour, and Port Hamble — attract vessel owners who demand the best. We deliver skilled marine wiring expertise to match the standards expected on the Hamble. We've worked through it long enough to know what matters.
From Hamble Point Marina to the surrounding The Hamble berths, the Victron Cerbo GX is the brain of your Victron setup — connecting all your Victron devices, offering real-time monitoring via GX Touch display, and enabling remote access through the VRM portal. As Victron dealers, we fit and configure Cerbo GX systems for boats in The Hamble to give you complete control over your energy system. Craft at Hamble Point Marina and Mercury Yacht Harbour get this attention as level whenever we're on site. The Hamble boat community is small enough that reputations get built one job at a time.
DVCC throughout the Victron network is what makes everything play together — most installs we audit don't have it set up correctly.
The mix of drying moorings and pontoon berths nearby means we bring the right kit for either situation.
Multiplus PowerAssist and PowerControl settings make a real difference dockside — we configure them to your boat's draw.
Multi-generation family craft are typical — wiring built up by three different owners over twenty years isn't unusual.
If a job requires more time or extra parts, we say so up front — never after the fact.
For vessel owners near Hamble Point Marina and Mercury Yacht Harbour, we provide written test certificates on completion — useful for insurance, surveys, and resale. Where parts are needed, we have direct trade accounts with Victron, Fogstar, Mastervolt and other major suppliers. We know which marinas are easy to access by van and which need a longer walk — useful when planning equipment-heavy jobs.
Across The Hamble's berths, we mount and wire the Cerbo GX, connecting it to your MultiPlus, MPPT controllers, battery monitors, and other Victron devices via VE.Bus and VE.Direct. Cerbo GX setup, MQTT, ModbusTCP, VRM dashboards — we deliver the monitoring layer as part of the install. On the Hamble Point Marina pontoons in particular, that's how we handle it. That's a recurring theme on the boats we attend in The Hamble.
Vessels kept at Hamble Point Marina face the usual coastal challenges — UV, salt and the occasional knock — we build for it. In Hampshire we see a lot of older fibreglass cruisers being upgraded — this kind of work is bread and butter for us. In Hampshire, older craft commonly need shore-power systems brought up to current benchmarks — we handle the certification too.
Working in The Hamble frequently, the GX Touch 50 or 70 display gives you a clear dashboard of your entire energy setup. We fit these at your nav station or helm for easy monitoring. DVCC throughout the Victron network is what makes everything play together — most installs we audit don't have it set up correctly. It's something we see often on The Hamble-based yachts.
For The Hamble skippers, after-care matters — we stay reachable for follow-up questions and small adjustments. Working in The Hamble means knowing the local marina contacts — useful for arranging access, lift-outs and contractor coordination. Plenty of The Hamble vessels are used for cross-Channel passages — systems need to be reliable, not just functional.
On the vessels we look after all over The Hamble, once connected to your yacht's WiFi or a 4G router, you can monitor your boat's systems from anywhere in the world via the VRM portal and app. From Cerbo GX configuration to MPPT solar networking and Multiplus inverter setup, we know the Victron ecosystem inside out. Skippers in and around Hamble Point Marina have come to expect that as the baseline. For The Hamble skippers, this is a regular consideration.
In Hampshire the local cruising grounds reward reliable electrics — we build with cross-Channel and Solent passages in mind. Local insurers in Hampshire expect documented work — we provide the paperwork as standard. The mix of berths in and around The Hamble means we bring gear for both pontoon and swinging-mooring access.
For skippers keeping a boat at Hamble Point Marina, the Cerbo GX can also monitor tank levels and temperatures. We install sensors for fuel, water, waste, and power bank temperature monitoring. VictronConnect, VRM, and Cerbo GX configuration are all part of what we deliver as spec — not just bolting hardware in. All over Hampshire, this kind of job makes up a real share of what we do.
Yachts based in The Hamble are often used by multiple family members or charter crews — clearly labelled controls matter. On older vessels near The Hamble, panel real estate is tight — we plan layouts to fit cleanly without compromising serviceability. Craft in Hampshire often see year-round use, so durability matters more than show — we build for that.
Of course — Our preference, on boats in and around The Hamble, is to sort the underlying issue properly rather than patch over symptoms — it works out cheaper in the long run. Documentation — circuit diagrams, cable schedules, photographs — is provided as part of each install. It's part of our standing coverage across The Hamble — no premium for being slightly off the main marinas. Get in touch with the basics — yacht type, marina, what you're trying to achieve — and we'll take it from there.
Certainly — On yachts in The Hamble, this is something we'll work through with you — there's no single right answer, but there's usually a sensible one for your specific setup. All job is signed off with a written test certificate suitable for insurance and survey purposes. Owners moored anywhere in The Hamble or the surrounding Hampshire coast can expect the same response. Best thing is to send a few photos and the yacht details — we can usually quote remotely from that.
Absolutely — On boats in The Hamble, this is something we'll task through with you — there's no single right answer, but there's usually a sensible one for your specific setup. We follow current ISO and BSS yacht standards, with full continuity and insulation testing on completion. From the Hamble Point Marina pontoons outward, this is well within our normal working area. Get in touch via the contact form with the yacht's basics and we'll book a visit at your convenience in The Hamble.
Pricing is straightforward: free assessment in The Hamble, written itemised quote, then task proceeds only with your sign-off. Nothing is added without your agreement. Send a couple of photos of the existing fitting and we'll come back with options and pricing.
Definitely — On yachts in The Hamble, this is something we'll work through with you — there's no single right answer, but there's usually a sensible one for your specific setup. Where AC and DC systems share space, we maintain proper separation and clearly distinct cable colours. Owners moored anywhere in The Hamble or the surrounding Hampshire coast can expect the same response. Send through the vessel details and we'll come back with timing and a written quote.
Most The Hamble visits booked within the week — same-day for genuine emergencies.
We're happy to talk through a job before quoting — drop a message with the boat make, model and berth in The Hamble, and we'll come back with the right next step.