Authorised Victron dealer and installer in The Hamble — whole energy setup design, installation and commissioning. Specialist boat gear, marine-grade fitting, full documentation.
For The Hamble boat skippers, here's the local picture: the Hamble is synonymous with sailing excellence, and its marinas — Hamble Point, Mercury Yacht Harbour, and Port Hamble — attract yacht skippers who demand the best. We deliver skilled marine wiring expertise to match the standards expected on the Hamble. Understanding that local context is part of why our task holds up.
All over The Hamble's waterfront — pontoons, drying berths, swinging moorings — victron Energy is the gold spec in boat power management. As authorised dealers, we design, fit, and commission complete Victron systems tailored to your vessel's demands. Around The Hamble, that mostly means craft berthed at Hamble Point Marina and Mercury Yacht Harbour. It's why local vessel owners in The Hamble keep coming back to us.
Multiplus PowerAssist and PowerControl settings make a real difference dockside — we configure them to your craft's draw.
Working near the spring tides The Hamble means we plan visits to suit your craft's berth and access window.
From Cerbo GX configuration to MPPT solar networking and Multiplus inverter setup, we know the Victron ecosystem inside out.
Skipper-fitted electronics from a decade ago often need re-terminating, re-fusing and re-routing — we see plenty of it locally.
Our approach is straightforward: do the job once, do it properly, and stand behind it afterwards.
For yacht skippers around Hamble Point Marina and Mercury Yacht Harbour, surveyors and brokers in the area frequently refer clients to us for pre-purchase wiring inspections. Minor follow-up adjustments and questions after handover are included — we don't disappear once the invoice is sent. Familiarity with local insurers and surveyors helps when work requires sign-off for renewal or claim purposes.
In The Hamble specifically, the heart of any serious yacht power setup. We fit and commission MultiPlus and Quattro units, configuring power assist, generator support, and shore power management for boats in The Hamble. Many Victron systems we're called to sort were installed by sparks who'd never seen the gear before — we set up the firmware, networking and configuration so it works as designed. Boats at Hamble Point Marina get this approach as a matter of routine. It's how we deliver consistent results near Hamble Point Marina.
Local insurers in Hampshire expect documented task — we provide the paperwork as spec. Common in The Hamble: salt-air corrosion on terminals — we treat every connection on this kind of task. On yachts moored at Hamble Point Marina, we frequently see issues caused by long-term shore power — we check for it on each visit.
On the Hampshire coast near The Hamble, maximise your solar harvest with Victron SmartSolar MPPT controllers. We size panels and controllers correctly, ensuring optimal charging for your battery type. Multiplus PowerAssist and PowerControl settings make a real difference dockside — we configure them to your craft's draw. That's a recurring theme on the vessels we attend in The Hamble.
Working in The Hamble means knowing the local marina contacts — useful for arranging access, lift-outs and contractor coordination. Near The Hamble, we regularly see legacy installs from multiple owners stacked on top of each other — bringing them back to a coherent design is regular work. In Hampshire we see a lot of older fibreglass cruisers being upgraded — this kind of job is bread and butter for us.
From day-to-day task in The Hamble, monitor your entire energy system remotely via Victron's VRM portal. We install Cerbo GX units, configure alerts, and set up mobile app access for craft owners in The Hamble. Victron equipment is brilliant when wired in and configured correctly — and a whole pain when it isn't. We've commissioned more Victron systems than we can count. It's how we job on each visit to Hamble Point Marina and the wider The Hamble area. It's something we see regularly on The Hamble-based craft.
The mix of berths in and around The Hamble means we bring gear for both pontoon and swinging-mooring access. In Hampshire the local cruising grounds reward trustworthy electrics — we build with cross-Channel and Solent passages in mind. Lots of The Hamble boats are used for cross-Channel passages — setups need to be dependable, not just functional.
Right across The Hamble's berths, from a simple SmartSolar controller to a full Victron system with lithium batteries, inverter, solar, and remote monitoring — we design setups that match your cruising needs. A properly configured Victron setup gives you remote monitoring, intelligent charging, and full visibility of your vessel's energy — when set up by someone who knows what they're doing. For The Hamble owners, this is a regular consideration.
Tidal access in The Hamble means visit timing matters — we plan near your berth's float window. Yachts kept at Hamble Point Marina face the usual coastal challenges — UV, salt and the occasional knock — we build for it. Skippers in The Hamble typically value reliability over flash — that aligns with how we approach every job.
In short, yes — We'll come and look at the craft in The Hamble, talk through what you're trying to achieve, and come back with a written proposal — no charge for that initial visit. We use only qualified-grade marine components, sourced through trade channels with full traceability. It's part of our standing coverage throughout The Hamble — no premium for being slightly off the main marinas. Best thing is to send a few photos and the craft details — we can usually quote remotely from that.
Of course — We'll come and look at the yacht in The Hamble, talk through what you're trying to achieve, and come back with a written proposal — no charge for that initial visit. Documentation — circuit diagrams, cable schedules, photographs — is provided as part of every fit. Boats kept near Hamble Point Marina get this kind of attention as part of our normal weekly route. Best route is a quick call — five minutes on the phone usually clarifies the right next step.
In short, yes — We'll come and look at the craft in The Hamble, talk through what you're trying to achieve, and come back with a written proposal — no charge for that initial visit. We use only skilled-grade boat components, sourced through trade channels with full traceability. Boat skippers across Hampshire ask us this regularly — and the answer is the same: yes, it's part of what we do. Drop us a line with the boat make, model, and current setup and we'll come back with a clear answer.
Yes — we're seasoned lithium installers, with Fogstar Approved status. Lithium upgrades in The Hamble are a major part of our job. Get in touch with the basics — vessel type, marina, what you're trying to achieve — and we'll take it from there.
The simple answer is yes — We'll come and look at the craft in The Hamble, talk through what you're trying to achieve, and come back with a written proposal — no charge for that initial visit. Fuse coordination, conductor sizing and terminal ratings are all checked against the load they'll actually see. All over the Hampshire coast, this is one of our more common enquiries. Send through the yacht details and we'll come back with timing and a written quote.
We'll come to The Hamble for a free look — no obligation, no callout fee.
Whether it's a five-minute fault diagnosis or a full tidal river-aware refit, The Hamble boats get the same considered approach we bring to every job on the South Coast.