Victron MultiPlus inverter/charger fit-out in The Hamble — PowerAssist, UPS function, and integrated charging. From quick issue-finds to full refits across Hamble Point Marina and beyond.
For The Hamble yacht skippers, here's the local picture: the Hamble is synonymous with sailing excellence, and its marinas — Hamble Point, Mercury Yacht Harbour, and Port Hamble — attract boat skippers who demand the best. We deliver skilled marine wiring expertise to match the standards expected on the Hamble. We've worked through it long enough to know what matters.
Speak to the yards around Hamble Point Marina and you'll hear it — the Victron MultiPlus is the gold standard for yacht inverter/chargers — combining powerful pure sine wave inversion with intelligent battery charging and unique PowerAssist functionality. As authorised Victron dealers, we fit MultiPlus and MultiPlus-II units on yachts in The Hamble with proper system design. Locally that includes craft kept at Hamble Point Marina and Mercury Yacht Harbour and the surrounding Hampshire berths. Boat skippers all over The Hamble know this pays back in fewer surprises later.
From Cerbo GX configuration to MPPT solar networking and Multiplus inverter setup, we know the Victron ecosystem inside out.
Spring and neap cycles change which berths are workable on any given day — we plan calls accordingly.
A properly configured Victron system gives you remote monitoring, intelligent charging, and full visibility of your yacht's energy — when set up by someone who knows what they're doing.
Lots of the yachts around The Hamble are kept on the water year-round, so reliability matters more than weekend convenience.
Good boat electrics work is invisible — neat, dependable, and never something you have to think about again.
For boat skippers around Hamble Point Marina and Mercury Yacht Harbour, yacht insurers and surveyors recognise our task, which matters for certification and claims. We use only marine-grade tinned cable, boat-rated terminals, and proper heat-shrink — no domestic shortcuts. Knowing the local yacht community means we can recommend the right rigger, sailmaker or engineer when you need one.
On craft in The Hamble, we install MultiPlus units in 12V, 24V, and 48V configurations. Proper cable sizing, fusing, and ventilation guarantee safe, dependable operation on your boat in The Hamble. DVCC throughout the Victron network is what makes everything play together — most installs we audit don't have it set up correctly. Yachts at Hamble Point Marina get this approach as a matter of routine. For The Hamble owners, this is a regular consideration.
Typical in The Hamble: salt-air corrosion on terminals — we treat each connection on this kind of job. Owners in The Hamble typically value reliability over flash — that aligns with how we approach each job. On boats moored at Hamble Point Marina, we frequently see issues caused by long-term shore power — we check for it on each visit.
Across The Hamble's berths, powerAssist supplements limited shore power with battery power, allowing you to run large loads from a small shore power connection. Ideal for UK marina berths. From Cerbo GX configuration to MPPT solar networking and Multiplus inverter setup, we know the Victron ecosystem inside out. Throughout Hampshire, this kind of work makes up a real share of what we do.
On older vessels around The Hamble, panel real estate is tight — we plan layouts to fit cleanly without compromising serviceability. In Hampshire, older boats commonly need shore-power setups brought up to current standards — we handle the certification too. The mix of berths near The Hamble means we bring equipment for both pontoon and swinging-mooring access.
Working in The Hamble frequently, we design and install AC output panels that distribute the MultiPlus output to outlets, water heaters, and appliances throughout your vessel. VictronConnect, VRM, and Cerbo GX configuration are all part of what we deliver as spec — not just bolting hardware in. It's how we work on every visit to Hamble Point Marina and the wider The Hamble area. On vessels near Hamble Point Marina, this is a routine part of what we deliver.
Tidal access in The Hamble means visit timing matters — we plan around your berth's float window. Local insurers in Hampshire expect documented work — we provide the paperwork as standard. Working in The Hamble means knowing the local marina contacts — useful for arranging access, lift-outs and contractor coordination.
On the vessels we look after all over The Hamble, every MultiPlus requires proper configuration — charge voltages, current limits, assistant programming. We configure your system perfectly for your battery type and usage. Many Victron systems we're called to sort were installed by sparks who'd never seen the gear before — we set up the firmware, networking and configuration so it works as designed. It's level practice for the task we carry out across The Hamble.
In Hampshire we see a lot of older fibreglass cruisers being upgraded — this kind of task is bread and butter for us. Many The Hamble boats are used for cross-Channel passages — setups need to be trustworthy, not just functional. Vessels kept at Hamble Point Marina face the usual coastal challenges — UV, salt and the occasional knock — we build for it.
Definitely — On boats in The Hamble, this is something we'll work through with you — there's no single right answer, but there's usually a sensible one for your specific setup. Where AC and DC systems share space, we maintain proper separation and clearly distinct cable colours. We've completed projects like this plenty of times for The Hamble-based owners. Get in touch via the contact form with the boat's basics and we'll book a visit at your convenience in The Hamble.
Absolutely — On yachts in The Hamble, this is something we'll task through with you — there's no single right answer, but there's usually a sensible one for your specific setup. We follow current ISO and BSS yacht standards, with full continuity and insulation testing on completion. If your yacht is berthed in The Hamble or anywhere along the Hampshire coast, we can help. Drop us a line with the vessel make, model, and current setup and we'll come back with a clear answer.
Absolutely — On yachts in The Hamble, this is something we'll task through with you — there's no single right answer, but there's usually a sensible one for your specific setup. We follow current ISO and BSS yacht standards, with full continuity and insulation testing on completion. If your yacht is berthed in The Hamble or anywhere along the Hampshire coast, we can help. Get in touch with the basics — vessel type, marina, what you're trying to achieve — and we'll take it from there.
Certainly — On boats in The Hamble, this is something we'll work through with you — there's no single right answer, but there's usually a sensible one for your specific setup. All job is signed off with a written test certificate suitable for insurance and survey purposes. We've completed projects like this plenty of times for The Hamble-based owners. Drop a message with the boat's age, type and current setup — we'll quote without needing a visit in plenty of cases.
Costs vary by scope, but we always provide a clear written quote before starting job in The Hamble. There are no hidden fees and no charge for the initial assessment visit. Send a couple of photos of the existing fitting and we'll come back with options and pricing.
Free assessment at your berth, written itemised quote, work to current marine standards.
For boat owners across Hampshire, The Hamble included, the working method is the same: assess properly, quote in writing, install to marine standards, hand over a complete document pack.